|
Residential Overview
Apartments & Condos
Building a New Home
Home Improvement
Electronics
Appliances
Lighting
Efficient Heating & Cooling
Assistance Programs
Partners
Renewable Energy
Printable Version

|
Standards and Guidelines
|
Overview |
Program FAQs | Become a Partner |
 The
Wisconsin ENERGY STAR ®
Homes Program uses a Home Performance Rating to determine the energy
rating score of a home. Homes eligible for Wisconsin ENERGY STAR
Homes certification will receive a minimum Home Performance Rating
score of 86 in addition to meeting the specific building standards
listed below (please refer to the full standards and guidelines for
full description and accepted methods):
- Site visits and performance tests
- Consultant must complete a minimum of three visits.
- Full coverage foundation insulation
- Foundation insulation required must cover the complete height of the
wall.
- Sealed sump pit - Any sump pit(s)
installed must be airtight.
- Air barrier - Home must have an
approved continuous and durable air barrier.
- Overall house ventilation -
Ventilation equipment for the home must be designed, installed, and
tested to satisfy minimum exhaust flow requirements.
- Spot ventilation for electric kitchen range
- Dedicated exhaust ducted to the exterior must be installed if the
home is not using a centrally ducted ventilation system with an exhaust
pickup in the kitchen.
- Spot ventilation for gas kitchen range
- Dedicated exhaust ducted to the exterior must be installed if the
home has a gas cooktop and/or gas oven.
- Spot ventilation for bathrooms - A
quiet bathroom exhaust fan ducted to the exterior is required if the
home is not using a centrally ducted ventilation system with an exhaust
pickup in bathrooms or other rooms with high moisture sources.
- Gas and wood-burning fireplaces -
No unvented combustion appliances, including unvented gas fireplaces,
are allowed. All wood-burning fireplaces or stoves must be fitted with
an outdoor combustion air supply and gasketed doors. All gas fireplaces
must be direct-vented and sealed face, and without doors that can open.
- Sealed, power-vented, or direct-vented
heating and water heating systems - Sealed or power-vented
combustion equipment must be installed, or the combustion equipment
must be isolated from the conditioned space.
- Carbon monoxide detector - Carbon
monoxide detectors must be installed on each floor with bedrooms.
Detectors can be hard-wired or plug-in models.
|